TAPS
Irwin Hanson High Carbon Steel 1 in.-8N
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 1 in.-8NC
*Number in Package: 1 pc.
*Thread Type: NC
*Packaging Type: Bulk
*Length: 5.5 in.
*Usage: IRWIN Taps and Dies are great for routine mainten
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel 1/2 in.-
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 1/2 in.-13NC
*Number in Package: 1 pc.
*Length: 6.25 in.
*Thread Type: NC
*Usage: General purpose threading and drilling
*Packaging Type: Carded
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel 1/4 in.-
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 1/4 in.-20NC
*Number in Package: 1 pc.
*Thread Type: NC
*Usage: General purpose threading and drilling
*Packaging Type: Carded
*Length: 6 in.
*Self-aligning tap
* Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work
Irwin Hanson High Carbon Steel 3/4 in.-
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 3/4 in.-10NC
*Number in Package: 1 pc.
*Length: 7.5 in.
*Packaging Type: Carded
*Thread Type: NC
*Usage: General purpose threading and drilling
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel 3/8 in.-
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 3/8 in.-16NC
*Number in Package: 1 pc.
*Length: 6 in.
*Packaging Type: Carded
*Usage: General purpose threading and drilling
*Thread Type: NC
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel 5/16 in.
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 5/16 in.-18NC
*Number in Package: 1 pc.
*Packaging Type: Carded
*Length: 6.25 in.
*Usage: General purpose threading and drilling
*Thread Type: NC
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel Fraction Ta
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Fraction Tap
*Tap Size: 7/8 in.-9NC
*Number in Package: 1 pc.
*Length: 8 in.
*Packaging Type: Bulk
*Thread Type: NC
*Usage: IRWIN Taps and Dies are great for routine mainten
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
* Straight flutes are ground to provide rapid chip removal for efficient threading
* Designed for hand threading work in a variety of ma
DeWalt High Speed Steel Drill & Tap Bit 10
*Material: High Speed Steel
*Metric or SAE: SAE
*Product Type: Drill and Tap Bit
*Tap Size: 10-32 UNF
*Number in Package: 1 each
*Usage: Tapping
*Drill Bit Included: Yes
*Length: 5.8 in.
*Packaging Type: Carded
*Shank Diameter: 1/4 in.
*Impact Ready
* 32 threads per inch
* Up to 10G
*Drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step
* Speed tip which penetrates material quickly, along with a hex shank for use in impact drivers
DeWalt High Speed Steel Drill & Tap Bit 12
*Material: High Speed Steel
*Metric or SAE: SAE
*Product Type: Drill and Tap Bit
*Tap Size: 12-24 UNC
*Number in Package: 1 each
*Usage: Tapping
*Packaging Type: Carded
*Drill Bit Included: Yes
*Length: 5.8 in.
*Shank Diameter: 1/4 in.
*Impact Ready
* 24 threads per inch
* Up to 10G
* Drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step
* Speed tip which penetrates material quickly, along with a hex shank for use in impact drivers
DeWalt High Speed Steel Drill & Tap Bit 8-
*Material: High Speed Steel
*Metric or SAE: SAE
*Product Type: Drill and Tap Bit
*Tap Size: 8-32 UNC
*Number in Package: 1 each
*Usage: Tapping
*Drill Bit Included: Yes
*Length: 5.8 in.
*Packaging Type: Carded
*Shank Diameter: 1/4 in.
*Impact Ready
* 32 threads per inch
* Up to 10G
*Drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step
* Speed tip which penetrates material quickly, along with a hex shank for use in impact drivers
DeWalt High Speed Steel Drill & Tap Bit 1/
*Material: High Speed Steel
*Metric or SAE: SAE
*Product Type: Drill and Tap Bit
*Tap Size: 1/4 in.-20 UNC
*Number in Package: 1 each
*Packaging Type: Carded
*Drill Bit Included: Yes
*Usage: Tapping
*Length: 5.8 in.
*Shank Diameter: 1/4 in.
*Impact Ready
* 20 threads per inch
* up to 10G
* Drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step
* Speed tip which penetrates material quickly, along with a hex shank for use in impact drivers
IMPACT DRILLTAP 10-24 DW *Brand Name: DeWalt *Material: High Speed Steel *Metric or SAE: SAE *Product Type: Drill and Tap Bit *Tap Size: 10-24 *Number in Package: 1 each *Length: 5.8 in. *Thread Type: UNC *Drill Bit Included: Yes *Packaging Type: Carded *Usage: Tapping
DeWalt High Speed Steel Drill & Tap Bit 3/
*Material: High Speed Steel
*Metric or SAE: SAE
*Product Type: Drill and Tap Bit
*Tap Size: 3/8 in.-16 UNC
*Number in Package: 1 each
*Length: 5.8 in.
*Drill Bit Included: Yes
*Usage: Tapping
*Packaging Type: Carded
*Shank Diameter: 1/4 in.
*Impact Ready
* 16 threads per inch
* Up to 10G
* Drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step
* Speed tip which penetrates material quickly, along with a hex shank for use in impact drivers
DeWalt High Speed Steel Drill & Tap Bit 5/
*Material: High Speed Steel
*Metric or SAE: SAE
*Product Type: Drill and Tap Bit
*Tap Size: 5/16 in.-18 UNC
*Number in Package: 1 each
*Drill Bit Included: Yes
*Usage: Tapping
*Packaging Type: Carded
*Length: 5.8 in.
*Shank Diameter: 1/4 in.
*Impact Ready
* 18 threads per inch
*Up to 10G
* Drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step
* Speed tip which penetrates material quickly, along with a hex shank for use in impact drivers
Irwin Hanson High Carbon Steel 1 in.-11
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Pipe Tap
*Tap Size: 1 in.-11-1/2NPT
*Number in Package: 1 pc.
*Thread Type: NPT
*Length: 4 in.
*Packaging Type: Bulk
*Usage: Pipe Fittings
Irwin Hanson High Carbon Steel 1/4 in.-
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Pipe Tap
*Tap Size: 1/4 in.-18NPT
*Number in Package: 1 pc.
*Thread Type: NPT
*Packaging Type: Bulk
*Usage: Pipe Fittings
*Length: 5 in.
*Cuts internal threads in pipes
* Nominal size of the tap is that of the pipe fitting being tapped
* Tapered atarate of 3/4" per foot
1905P 1/2-14 NPT TAPER PIPE TAP
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Pipe Taper Tap
*Tap Size: 1/2 in. - 14
*Number in Package: 1 pc.
*Thread Type: NPT
*Length: 6 in.
*Packaging Type: Carded
*Usage: Cuts internal threads in pipes
*Number of Flutes: 4
*Ideal for pipe fittings
*Tapered at a rate of 3/4 in. per foot
*Nominal size of the tap is that of the pipe fitting being tapped
1906P TAP 3/4-14 NPT PIPE POUCHED
*Sub Brand: Hanson
*Material: Carbon Steel
*Metric or SAE: SAE
*Product Type: Pipe Taper Tap
*Tap Size: 3/4 in. - 14 NPT
*Number in Package: 1 pc.
*Length: 5.75 in.
*Packaging Type: Bagged
*Thread Type: NPT
*Usage: Cuts internal threads in pipes
*No of Flutes: 5
*Ideal for pipe fittings
*Tapered at a rate of 3/4 in. per foot
*Nominal size of the tap is that of the pipe fitting being tapped
Irwin Hanson High Carbon Steel Plug Tap 10
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: Metric
*Product Type: Plug Tap
*Tap Size: 10mm-1.50
*Number in Package: 1 pc.
*Packaging Type: Carded
*Length: 6 in.
*Usage: Auto Repair and Machinery
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of materials
*Taps produce a class 2B thread
Irwin Hanson High Carbon Steel 10-24NC
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Plug Tap
*Tap Size: 10-24NC
*Number in Package: 1 pc.
*Length: 6 in.
*Thread Type: NC
*Usage: General purpose threading and drilling
*Packaging Type: Carded
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel Plug Tap 10
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: SAE
*Product Type: Plug Tap
*Tap Size: 10-32NF
*Number in Package: 1 pc.
*Usage: General purpose threading and drilling
*Length: 5.8 in.
*Thread Type: NF
*Packaging Type: Carded
*Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of mat
Irwin Hanson High Carbon Steel Plug Tap 12
*Sub Brand: Hanson
*Material: High Carbon Steel
*Metric or SAE: Metric
*Product Type: Plug Tap
*Tap Size: 12mm-1.25
*Number in Package: 1 pc.
*Packaging Type: Carded
*Usage: Auto Repair and Machinery
*Length: 6 in.
*Straight flutes are ground to provide rapid chip removal for efficient threading
*Designed for hand threading work in a variety of materials
*Taps produce a class 2B thread
